Rent from $94.00
Rent from $39.00
A robust, double-sided hedge trimmer with a 60 cm cutter bar. The multi-position handle, low weight and easy starts provide good handling, while the high capacity, professional knife blades, open blade guard and power output allows for excellent cutting performance.
Rent from $38.00
Rent from $75.00
Rent from $230.00
Rent from $60.00
Rent from $175.00
Haulotte 3632 T Towable Lift
Rent from $210.00
HAULOTTE 5533 A TOWABLE LIFT
Rent from $75.00
Rent from $50.00
TE 1000-AVR 120-Volt Demolition Hammer with Makinex Trolley
*SAT-MON 9:00AM
Rent from $280.00
Working height 52 ft 6 in
Max. outreach 27 ft 3 in
Platform capacity 500 lb
Number of people (indoor) 2
Rent from $60.00
The Ground Hog HD99 is a Towable Hydraulic Earthdrill that is designed to be powerful, easy to use and require very little maintenance.
The HD99 is the most powerful earthdrill in the Ground Hog line. With it's 9hp Honda or Subaru engine, the HD99 can easily dig with any Ground Hog auger up to 18 inches in diameter. The use of hydraulics allows the HD99 to have variable auger speed and reverse which is very useful if the auger gets stuck.
Rent from $57.00
Floor Grinders solve first layer applications like smoothing concrete, preparing floors for new coverings and removing thinner coatings, soft materials and ice. This dual-disc model grinds approximately 500sqft per hour.
Rent from $34.00
8" Manual Tile Shark Floor Stripper
Electric floor strippers remove vinyl, linoleum, carpet, rubber, and other softer coverings from concrete floors. The "Tile Shark" floor stripper is 110 volt and can be used for removal of vinyl, linoleum, carpet, rubber, and other soft floor coverings.
Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
Folding handle for easy transport & storage
Sharktooth wrench for easy blade changes
Heavy-duty steel material deflector shield
Multiple position hand held assembly
Heavy-duty flexible rubber isolators
Belt-driven oscillating blade system provides 1,850 oscillating hits per minute
Quick release pin angle adjustment
7-Gauge steel welded construction
Push plate & built-in weight make material removal a quick & easy job
Pinch blade system accepts floor stripper blades of any make & size
Rent from $94.00
EDCO Self-Propelled Saws are built like tanks, designed for high production and low maintenance cutting. Cut miles of roadway with little to no vibration because of their heavy-gauge steel frames, heavy-duty shafts and bearing assemblies.
Ideal For...
Highway, road and bridge deck repair
Utility installation
Traffic loop installation
Rent from $60.00
EDCO's 18-in. SK-18 downcut walk-behind saw is ideal for short-run slab cutting, contraction joints, asphalt patch repairs, and traffic loop installation and trenching.
18-in. blade capacity
Improved throttle cable
Easy turn crank for lowering and raising blades in and out of cut
Screw boot belt tensioner prevents frame damage
7-gauge steel blade guard with welded protective segment flap
Heavy-duty lifting bail (optional)
13-hp gasoline engine
Heavy-duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
High quality molded rubber wheels
3,600 rpm
6.75-in. cutting depth
214 lb.
Rent from $45.00
The EDCO MODEL SK-14" 9-HP Gasoline Powered Downcut Push Walk-Behind Saw With Water Tank Assy. Is Ideal For Short-Run Slab Cutting Contraction Joints Patch Repairs In Asphalt Traffic Loop Installation & Trenching 14" Capacity Walk Behind Flat Saws Are Built Around Dependable Honda Gasoline Engines. One Of The Most Durable & Easily Maintained Saws Available On The Market Today. The Tough Welded Box Design Reduces Vibration & Provides A Very Stable Sawing Platform, Eliminating "Frame Twist" Common In Saws Of Lighter Construction. With The Engine Mounted Forward On The Frame, The Weight Is Concentrated Over The Arbor Shaft, Which Helps Keep The Blade In The Cut.
Rent from $53.00
Tsurumi 3" trash pump model EPT3-80HA is powered by a heavy duty Honda GX240 gas engine with low oil sensor.
Silicon Carbide mechanical seal provides for the longest life in its class.
High Chrome impeller, Cast Iron volute casing plus Stainless Steel wear plate promise increased durability and decreased maintenance.
Pump/engine set mounted to cage frame on Rubber Vibration Cushions to buffer stress and wear.
Durable Rolled-Steel frame provides pump/engine with maximum protection, perfect ease of handling or transport and safe operation.
SHOP FOR PARTS
Discharge/Suction Size: 3" NPT Coupling
Engine: Honda GX240
Max Output (hp/rpm): 8.0/3600
Dimension (L x W x H, in.): 27-1/2 x 20-1/8 x 25-5/8
Pump Weight (lbs.): 136
Rent from $42.00
Durable trash pumps in 2 inches discharge & 1/2HP. Designed to pump water containing sand, solids and debris with minimal wear and clogging.
Built-in shaft mounted agitator suspends solids.
Urethane Semi Vortex Impeller for maximum durability and pump performance.
Dual inside mechanical seal with SiC faces for longer life.
Oil Lifter provides lubrication of the seal faces. (Patented)
V-Ring Seal design protects mechanical seal from abrasive particles.
SHOP FOR PARTS
Motor Output (HP): 1/2
Phase: Single
Discharge Bore (in.): 2
Voltage/Amp: 110/5.4
Cable Length (ft.): 20
Dimension (Dia x H, in.): 10-1/16 x 12-15/16
Continuous Running Water Level (in.): 3.5
Pump Weight (lbs.): 30
Rent from $27.00
Durable trash pumps in two sizes—a 1HP & 3-inch discharge and a 1/2HP & 2-inch discharge. Both designed to pump water containing sand, solids and debris with minimal wear and clogging.
Built-in shaft mounted agitator suspends solids
Urethane semi vortex impeller for maximum durability and pump performance
Dual inside mechanical seal with SiC faces provides longest operational life
Oil Lifter (Patented) provides lubrication of the seal faces
V-ring seal design protects mechanical seal from abrasive particles
HSZ Series - float operated automatic operation version
Rent from $200.00
ENGINE:
Briggs & Stratton Vanguard V-Twin 31hp
DETAILS:
Height: 49.5"
Length (head to side): 79"
Length (head straight): 98"
Width: 35.5"
Weight: 1,700 lb.
Hydraulic Reservoir: 14 gallons
Hydraulic Flow to Head: 13.3gpm
Track Width: 7.1"
Total Ground Contact: 470 sq. in.
Ground Drive Forward: 290 ft/min
Ground Drive Reverse: 180 ft/min
WHEEL SPECIFICATIONS
Cutting Wheel: 19.2" diameter to tooth
Cutting Teeth: 0.750 thick, 16 green teeth
Cutting Depth: 12"
Cutting Height: 32"
Head Swing: 134°, 99.7" arc
FEATURES
Easy controls operate the track drive and cutter wheel
Time-tested track design absorbs impact and provides stability
Center-mounted cutter wheel provides 134º head swing
Gear pumps coupled to the engine drive the cutter wheel, tilt, and swing
Counterbalance valves on each track drive prevent motors from slipping
Rent from $75.00
Barreto 16-SG Stump Grinder
Rent from $75.00
The Barreto 13SGH stump grinder has a unique design pivot over the centerline of the wheels, allowing the grinding head to sweep easily across the stump while the wheelbase remains stationary. ... The swivel head has a swing arc of 35 and the cutting wheel has eight carbide green teeth with three cutting surfaces.
Rent from $35.00
The next step in distance and accuracy
The RL-H5A is a next generation self-leveling construction laser with great distance and high accuracy.
Long-range operation (800 m)
Smart long-range receiver
Simple, intuitive manual slope capability
±10 Arc second horizontal accuracy
Extralong battery life (100 hours)
Tough IP66 weatherproof rating
NOTE: Due to interstate and international shipping constraints, Topcon products do not include alkaline batteries. Types and numbers of alkaline batteries required for each product are clearly indicated as part of the product package and should be purchased locally.