Bumper Pull Dump 83" X 16'

3/4 TON TRUCK MINIMUM REQUIRED TO RENT

M18 FUEL™ 1-1/2" Magnetic Drill Kit

BITS RENT SEPERATELY

• Manufacturer Manitou Group
• Model Name General Purpose Bucket
• Trim Name CBR 780 / 1950
• Generic Type (Primary) Buckets

Skid-Pro SKP1406

The Diamond T Skid-Pro Trailer is leading the industry with its design and functionality available in Bumper Pull or Gooseneck. Performance while pulling empty and with a load are reasons that make our SKP1406 an industry leader which includes the following standard features:

• 3/8"x2"Full Rubrail w/ Stakepockets
• Spare Tire Rack on BP and GN
• Wrap Tongue on BP and GN
• DP Fenders w/ Teardrop
• Sealed Factory Wiring Harness
• 12000# Side Handle Jack
• 2' Long Dovetail
• Chain Tray on BP and GN
• 100% Prime and Paint
• Tubing Tail Board w/ Sealed LED’s
• 5' Long 3" Channel Spring Assist Knee Ramps
• 5 Position Adjustable Coupler

60" BRUSH HOG ATTACHMENT FOR MID SIZE SKID STEERS

FEATURES

• 18" cutting width
• Independent track drive
• Two forward speeds
• Intuitive drive controls
• Solid control rod linkage
• Automatic cutter blade shut-off in reverse
• Easy access pivoting upper body
• Single hydrostatic pump powers independent track control

It makes any outdoor living or patio area warm and cozy-almost instantly-just like a fine dining experience. A weighted base provides stability. It’s also a great value for restaurant and business owners. The durable design is built to last and withstand the elements. Use with a 20 lb. liquid propane tank. Heater comes with full 20lb propane cylinder. Used propane will be billed upon return of the heater.

42" MINI SKID SKELETON GRAPPLE BUCKET ATTACHMENT

WM90S Series

9cf Plaster/Mortar, Honda GX240

MC94PH8

9 cf Concrete, Honda GX240The workhorse of the rental industry. EasyClean makes all the difference.

• EasyClean polyethylene drum
• Powered by reliable Honda GX240 gasoline engine
• Mixing capacity of 9 cubic feet (248 liters)
• Heavy-duty tubular steel frame with forklift pocket
• Suspension springs standard for less bounce, sway
• Powder coat paint for a durable long-lasting finish

The Brown Brush OX is the most robust single-spindle, walk-behind brush cutter on the market today. It is designed to cut up to 3" diameter trees and saplings thanks to our superior Quadro Cut blade system.

This powerful SIMPSON^® hot water mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities, and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine, and begin cleaning. Equipped with a (49-State compliant) HONDA^® engine with an electric start and reliable COMET triplex pump.

No need for wheelbarrows, shovels or other hand tools when you roll onto jobsites with the Bobcat® MT100 mini track loader.

• Fit through gates, doorways and other narrow spaces
• 1,000 lb. rated operating capacity
• Powerful breakout force and impressive lift height

DEVELON DD100 LGP DOZER

DOZERS DO REQUIRE A $1000.00 DEPOSIT THAT IS REFUNDABLE IF THERE IS NO DAMAGE, UNIT DOES NOT NEED FUEL ADDED UPON RETURN.

DOZERS ARE FOR GROUND CONTACT ONLY RENTAL. NO TREE WORK OR DEMOLITION WORK.

Turn your forklift into an aerial work platform and safely go where scissor lifts can’t with a Star Industries Safety Work Platform.

• Reach over obstructions and access places where scissor lifts can’t
• Faster and cheaper than scaffold
• Self-closing gates, rigid modular guardrails and lanyard tie down points for increased operator safety

• Compact Size Yet Still Provides a

Generous Work Area

• Fits on Most Elevators with

Shortest Overall Length and Low

GVW (Gross Vehicle Weight)

• 24 in. (61 cm) Roll-Out Deck

Extension with Incremental Lock

Positions

• Direct Electric Drive for Extended

Duty Cycle, Smooth Control and

Fewer Leak Points

• 2-Person Platform Indoors with

500 lbs. (227 kg) Capacity

• Fully Proportional Lift and Drive

Controls

• 9900# 
• 1544.9hrs

• 4800lbs
• 1725hrs

• 4600lbs
• 1480hrs

• 6165lbs
• 1030hrs

MLM-16 (Mini-Pro Series)

Lift Heights

• Standard forks - up: 16 ft 1 in
• Standard forks - down: 14 ft 5 in

Height - Stowed: 5 ft 2 ¾ in

Length - Stowed: 34 1/2 in

Width - Stowed: 30 ½ in

Forks: 30 in (length) x 23 in (width - outside)

Weight: 298 lbs

Load Capacity:

• 14 in load center: 650 lbs
• 24 in load center: 430 lbs
• 42 in load center: 175 lbs

MLC-24 (Construction Pro Series)

Lift Heights

• Standard forks - up: 24 ft 4 in
• Standard forks - down: 22 ft 7 in

Height - Stowed: 7 ft 2 ¾ in

Length - Stowed: 33 3/8 in

Width - Stowed: 30 ½ in

Forks: 30 in (length) x 23 in (width - outside)

Weight: 358 lbs

Load Capacity:

• 14 in load center: 650 lbs
• 24 in load center: 430 lbs
• 42 in load center: 175 lbs

SY35U

Operating Weight

8,367 lbs (canopy)
3,795 kg

Net Power

23.3 hp
17.4 kW

Dig Depth

10' 2"
3,105 mm