79" X 12' SCISSOR LIFT UTILITY TILT TRAILER GVWR 7K

Turn your forklift into an aerial work platform and safely go where scissor lifts can’t with a Star Industries Safety Work Platform.

• Reach over obstructions and access places where scissor lifts can’t
• Faster and cheaper than scaffold
• Self-closing gates, rigid modular guardrails and lanyard tie down points for increased operator safety

• Compact Size Yet Still Provides a

Generous Work Area

• Fits on Most Elevators with

Shortest Overall Length and Low

GVW (Gross Vehicle Weight)

• 24 in. (61 cm) Roll-Out Deck

Extension with Incremental Lock

Positions

• Direct Electric Drive for Extended

Duty Cycle, Smooth Control and

Fewer Leak Points

• 2-Person Platform Indoors with

500 lbs. (227 kg) Capacity

• Fully Proportional Lift and Drive

Controls

• Outstanding rough terrain driving features
• 4 wheel drive
• Automatic differential lock
• Excellent gradeability of 40 %
• Ground clearance of 11 in
• Durable and easy to maintain
• Outriggers positioned within the machine footprint
• Durable and reliable upper control box
• Optimized accessibility to components
• Built-in diagnostic tool
• Exceptional productivity
• Fully proportional controls
• Tight turning radius
• One switch to deploy and retract all 4 outriggers

https://www.haulotte-usa.com/p...

GENIE Z45/25 ARTICULATING BOOM LIFT

The MAN'GO 33 is one of the most compact aerial offroad solutions offering by Manitou. Light and handy, this unit helps achieve effective heights, nomatter the space contraints within the jobsite area. The MAN'GO 33 is distinguished by its high compactness, turret rotation of 350 degrees, and its quick lift arms. For your comfort and safety, the MAN'GO 33 is equipped with a galvanized platform. It also works well in all-terrain conditions thanks to its high ground clearnance and ability to operate in 4-wheel drive.

Haulotte 3632 T Towable Lift

• Hydraulic outriggers and automatic leveling allow operation in under 30 seconds
• Superior combination of industry leading capacity and outreach
• Can be towed by a standard half-ton pickup truck - No commercial driver’s license needed
• Exceptional productivity
• Air / water lines and 110V GFI protected power to the platform

HAULOTTE 5533 A TOWABLE LIFT

• Hydraulic outriggers and automatic leveling allow operation in under 30 seconds
• Superior combination of industry leading capacity and outreach
• Can be towed by a standard half-ton pickup truck - No commercial driver’s license needed
• Exceptional productivity
• Air / water lines and 110V GFI protected power to the platform

Working height 52 ft 6 in

Max. outreach 27 ft 3 in

Platform capacity 500 lb

Number of people (indoor) 2

Key Specs

Platform Height: 25 ft 6 in. / 7.77 m
Platform Capacity: 507 lb / 229.97 kg
Machine Width: 2 ft 8 in. / 0.81 m
Drive Speed - Platform Lowered: 3 mph / 4.83 km/h

Key Features
Run Longer on a Single Charge: Delivers double the battery life*
Work in Sensitive Areas: Available CleanGuard leak containment system allows for work on sensitive flooring
Reduce Operating Costs: Electric drive and integrated components with reduced hydraulic components on the entire machine lower the chances for leaks and service calls to keep you on the job longer
Increase Your Maneuverability: Narrow width fits through most standard doorways and tight aisles

Exceptional productivity

Load capacity up to 1000 lbs (C 2747 E)

Driveable at full height

Indoor & outdoor use with the same load capacity

3 ft extension platform

47 in width

Extended duty cycles

Reliable and easy to maintain

STANDARD EQUIPMENT

• Pothole protection
• Battery charge indicator
• Proportional lift and drive
• Removable platform control box
• Swing out component tray
• Battery charger 110 V / 60 Hz
• Non-marking tires
• Free wheeling device
• Tilt alarm
• Platform load management system
• Manual platform lowering valve
• Integrated forklift pockets
• Tow hooks
• Horn
• Hour meter

Best driving and lifting experience

AC powered

Precision driving control

Smooth proportional motions

Industry leading turning radius

Ultimate versatility

Pass through standard doorways

Mobile pothole protection

Indoor - outdoor rated

Minimal maintenance and downtime

Maintenance free AC motors

Easy access swing out trays

Haulotte Activ'Screen (onboard diagnostics)

Smart transportability

Longer lifetime

Extreme durability

Optimized total cost of ownership

Haulotte Activ'Energy Management takes care of your batteries

High performance & rough terrain capacities

Optional & removable, low fuel consumption Range Extender

Multiple charging modes including optional accelerated charge

Extended duty cycles

Activ’Energy Management takes care of your battery

Easy access to components

Activ’Screen: on-board configuration & diagnostic interface

Maintenance and service-oriented

Smooth & proportional movements

Versatile use: outdoor / indoor

Silent & clean operations

Full electric drive

Drive axle with manual locking rear differential increases ground traction

Oscillating axle delivers excellent ground adherence

Platform capacity of 750 kg

The Genie® GS™-2032 slab scissor lifts are electric models boasting the versatility to work in indoor and outdoor construction, maintenance and installation applications with firm, level surfaces. Available with Genie® AC E-Drive or hydraulic drive configuration.

Overview

Genie® AC E-Drive configuration offers increased runtime, reduced maintenance costs and industry-leading performance

Easy to maneuver in tight spaces

Quiet, zero-emission electric operation

Large platform workspace with 36 in (0.91 m) roll-out platform extension

Swing out components trays for easy access

User-friendly Smart Link™ dual-zone controls for indoor and outdoor use

Max Working Height 26 ft 1 in | 8.13 m
Capacity 800 lb | 363 kg
Machine Width 2 ft 8 in | 0.81 m
Machine Length 8 ft | 2.44 m
Weight 4,038 lb | 1,832 kg

The Genie® GS™-1930 slab scissor lifts are easy to maneuver in tight spaces, boast quiet electric operation and are ideal for indoor and outdoor applications on firm, level surfaces. Available with Genie® AC E-Drive or hydraulic drive configuration.

Overview

Genie® AC E-Drive configuration offers increased runtime, reduced maintenance costs and industry-leading performance

Front-wheel drive and zero inside turning radius

Easily pass through standard single or double doors

Large platform workspace with 36 in (0.91 m) roll-out platform extension

Swing out components trays for easy access

User-friendly Smart Link™ dual-zone controls for indoor and outdoor use

Max Working Height 25 ft 3 in | 7.85 m
Capacity 500 lb | 227 kg
Machine Width 2 ft 6 in | 0.76 m
Machine Length 6 ft | 1.83 m
Weight 3,209 lb | 1,456 kg