Engine
Make Yanmar
Model 3TNV88F-ESBV Tier IV
Type Diesel
Displacement (L) 100.2 cu.in. (1.64)
Gross Power (kW) @ rpm 24.5 hp (18.2) @ 2200
Net Power (kW) @ rpm 23.9 hp (17.8) @ 2200
Fuel Tank (L) 10.8 gal. (41)
Fuel Consumption (L/hr) 1.03 gal./hr (3.9)
Hydraulics
Pumps 2 variable, 2 gear
Flow Rate (L/min) 29.3 gpm (110.8)
Working Pressure (bar) 3060 psi (211)
Swing System Pressure (bar) 2844 psi (196)
Oil Cooler Standard
Hydraulic Tank (L) 10.6 gal. (40)
Undercarriage & Slewing System
Travel Speed - dual (km/hr) 1.7/2.8 mph (2.7/4.5)
Gradability 20°
Track Type / Width (mm) Rubber / 11.8" (300)
No. of rollers per Side (track/idle) 4/1
Undercarriage Length (mm) 7'1" (2160)
Track Length on Ground (mm) 5'10" (1778)
Ground Clearance (mm) 12.6" (320)
Ground Pressure - Cab/Canopy (kPa) 5.0/4.8 psi (34.3/33.1)
Slew Speed 9.5 rpm
Maximum Drawbar Pull (kg) 7306 lbs. (3314)
Maximum Bucket Breakout (kg) with quick coupler 5,643 lbs. (2560)
Maximum Bucket Breakout (kg) without quick coupler 7,216 lbs. (3273)
Maximum Arm Digging Force (kg) with quick coupler 4,226 lbs. (1917)
Maximum Arm Digging Force (kg) without quick coupler 4,586 lbs. (2080)
Dimensions
Operating Weight with Canopy (kg) 7905 lbs. (3585)
Operating Weight with Cab (kg) 8214 lbs. (3725)
A. Max. Digging Depth (mm) 10'8" (3250)
B. Max. Vertical Wall Digging Depth (mm) 7'11" (2410)
C. Max. Reach at Ground Level (mm) 17'3.5" (5270)
D. Transport Length (mm) 15'8" (4770)
E. Undercarriage Length (mm) 7'1" (2160)
F. Max. Digging Height (mm) 16'9.2" (5110)
G. Max. Dump Height (mm) 11'2.3" (3410)
H. Minimum Front Swing Radius (mm) 7'1.4" (2170)
I. Transport Height (mm) 8'1" (2470)
J. Blade Below Ground (mm) 1'2.6" (370)
K. Overall Base Width (mm) 5'8.5" (1740)
L. Track Width (mm) 11.8" (300)
M. Ground Clearance (mm) 12.6" (320)
N. Parallel Offset Right (mm) 2'1.2" (640)
O. Parallel Offset Left (mm) 1'11.2" (590)
P. Rear End Swing Radius (mm) 2'6.5" (775)
Q. Boom Swing Angle - Left 43°
R. Boom Swing Angle - Right 65°
Max. Dig Depth with 8ft. (2.5 m) Flat Bottom 9'1" (2770)
Dozer Blade
Width - extended / retracted (mm) 5'8.5" (1740)
Height (mm) 14.6" (370)EX_SpecDiagram