Engine
Make Yanmar
Model 4TNV88C-PBV Tier IV
Type Diesel
Displacement (L) 133.6 cu.in. (2.19)
Gross Power (kW) @ rpm 39.0 hp (29.1) @ 2400
Net Power (kW) @ rpm 37.7 hp (28.1) @ 2400
Fuel Tank (L) 17.4 gal. (66)
Fuel Consumption (L/hr) 1.24 gal./hr (4.7)
Hydraulics
Pumps 2 variable, 2 gear
Flow Rate (L/min) 35.1 gpm (132.8)
Working Pressure (bar) 3,133 psi (216)
Swing System Pressure (bar) 3,133 psi (216)
Oil Cooler Standard
Hydraulic Tank (L) 10.0 gal. (38)
Undercarriage & Slewing System
Travel Speed - dual (km/hr) 1.5/2.9 mph (2.4/4.6)
Gradability 20°
Track Type / Width (mm) Rubber / 13.8" (350)
No. of rollers per Side (track/idle) 4/1
Undercarriage Length (mm) 8'6" (2590)
Track Length on Ground (mm) 7'4.4" (2246)
Ground Clearance (mm) 13.6" (345)
Ground Pressure - Cab/Canopy (kPa) 4.4/4.3 psi (30.6/29.4)
Slew Speed 10 rpm
Maximum Drawbar Pull (kg) 10,611 lbs. (4813)
Maximum Bucket Breakout (kg) with quick coupler 6,497 lbs. (2947)
Maximum Bucket Breakout (kg) without quick coupler 8,206 lbs. (3722)
Maximum Arm Digging Force (kg) with quick coupler 4,676 lbs. (2121)
Maximum Arm Digging Force (kg) without quick coupler 5,103 lbs. (2315)
Dimensions
Operating Weight with Canopy (kg) 10,417 lbs. (4725)
Operating Weight with Cab (kg) 10,814 lbs. (4905)
A. Max. Digging Depth (mm) 11'7.8" (3550)
B. Max. Vertical Wall Digging Depth (mm) 7'9.7" (2380)
C. Max. Reach at Ground Level (mm) 18'10" (5740)
D. Transport Length (mm) 17'5.4" (5320)
E. Undercarriage Length (mm) 8'6" (2590)
F. Max. Digging Height (mm) 18'8.4" (5700)
G. Max. Dump Height (mm) 12'0.9" (3680)
H. Minimum Front Swing Radius (mm) 7'9.7" (2380)
I. Transport Height (mm) 8'4" (2540)
J. Blade Below Ground (mm) 1'9.3" (540)
K. Overall Base Width (mm) 6'4.4" (1940)
L. Track Width (mm) 1'1.8" (350)
M. Ground Clearance (mm) 1'1.6" (345)
N. Parallel Offset Right (mm) 2'6.3" (770)
O. Parallel Offset Left (mm) 2'2.8" (680)
P. Rear End Swing Radius (mm) 3'2.2" (970)
Q. Boom Swing Angle - Left 68°
R. Boom Swing Angle - Right 68°
Max. Dig Depth with 8ft. (2.5 m) Flat Bottom 10 '3" (3135)
Dozer Blade
Width - extended / retracted (mm) 6'5.6" (1970)
Height (mm) 15.7" (400)